迪奥科技标语
What are the characteristics of Gigabit network industrial cameras?
Author:Administrator   Published in:2019-09-16 19:01

  Gigabit network industrial cameras, in fact, through the Gigabit network interface to integrate some of the data output, can process data quickly. Gigabit Ethernet industrial cameras also support flash, hot swap and trigger functions, making it easy to operate the network camera and complete the system. Gigabit industrial cameras use high-resolution, high-performance CMOSA chips. Below, Shenzhen industrial camera manufacturer - TEO Xiaobian will come to you to introduce the characteristics of the Gigabit network industrial camera.

1.jpg

  1. When the Gigabit network industrial camera is directly connected to the computer, you must manually set the computer IP address. The computer IP and camera IP need to be staggered and cannot be repeated. (The camera factory setting IP is 192.168.1.228 or 192.168.1.229, which is not required to be connected via a router).

  2. Gigabit network industrial camera needs to connect to the network for several seconds (6~8s) after power-on. After the network is connected, the camera will be operated accordingly. (The two LEDs on the network port are lit, indicating that the network is properly connected. It operates).

  3. If the network cable is disconnected or powered off during use, you need to click to refresh the device in the program. After the computer finds and connects the device, you can operate it.

  4. When multiple cameras work at the same time, if it is connected to the router, the router will automatically assign different addresses to the camera, but when connecting to a switch without routing function or directly connecting multiple Gigabit cameras on the computer, you need to manually Modify the camera IP. If the camera IP is repeated, it will cause camera conflict and will not work properly.

  5. When using the Gigabit network industrial camera, the ambient temperature and humidity should not exceed the allowable range; the camera should not be used outdoors. If you need to use it outdoors, please contact the manufacturer.

  6. Gigabit network industrial camera is equipped with infrared filter, its cut-off frequency is 650nm, so it is not suitable for the application of infrared light. If you need such application, please contact the manufacturer.

2.jpg

  7. Gigabit Ethernet industrial camera should install the driver correctly before use, otherwise the camera will not work properly.

  8. In the process of losing or using, the Gigabit industrial camera should be protected from strong crushing, impact and vibration.

  9. When opening the product, make sure that the driver is properly installed and the BaseCam installer clicks on the white balance. It is recommended to face a white object (such as white paper).

  10. When cleaning the product filter, do not use corrosive or abrasive cleaning agents. Wipe gently with a soft, soft cloth (or dust-free paper) and a neutral detergent (such as alcohol); or use Absorb the ball to blow off the dust; do not touch the camera filter with your fingers or hard objects to avoid scratching.

  11. When the Gigabit network industrial camera is not used for a long time, please keep it in a dry place; please avoid permanent damage caused by strong light (such as sunlight).

  12. When the Gigabit network industrial camera is not in use, it should be covered with a dust cover as standard to prevent dust from entering; please do not open the casing without authorization, and return it to the original factory for repair if it fails.

  The above is the introduction of Shenzhen TEO Xiaobian for the characteristics of Gigabit network industrial cameras. Gigabit Ethernet industrial camera is the fastest growing interface in industrial digital cameras, and it is also a universally used digital interface, which can almost completely replace the camera interface of analog devices. It is widely used in many industries.


Copyright @ 2016 - 2019 迪奥科技 版权所有 备案号: 粤ICP备09101295号